Mi Casa, Su Casa | Chomp | Testosterone Tasks | Vim & Vigor | Gear | Refer-A-Friend
Check out the new book! | Porch Talk | Cash Money | Emil Post | Show Off


more mi casa su casa
» Spring Into Spring
» Beyond Basket Weaving
» And The Oscar Goes To
» Great Cover Up
» Boomerang Table
» mi casa, su casa archives


Let There Be Light
by Scott Acord

Intro | Preparation | Electrical | Switch | Diagram

Electrical
  1. Run your electrical cord through the spine of the book, bottom to top.
  2. Next, run the cord through the hollow threaded rod and base of light socket, in that order.
  3. Attach the wire to the socket. To do this, loosen the screws on both sides of the socket and wrap the exposed wires around each of screws.
  4. Tighten the screws.
  5. Attach the base of the socket. See Diagram
If you need to strip the wire
Most cords will come stripped, but just in case… Split the cord with the X-acto knife giving yourself some room to work (about 1 ½" should be sufficient). Next cut around the protective plastic about ½" from the end - careful not to cut into the wire. Carefully pull off the end of the plastic revealing a bare wire.

next >



tell it to the 'tat
Got a great idea? Know something we don't know? Or maybe there's something you want to know? Write it up. Let us know. Submit an article, an idea or a plain old question. Let the cohabitation begin.